Comments on: Tech Video: Tiberius 8 Disassembly

By: ModernIntel

ModernIntel — Fri, 05 Mar 2010 01:14:19 +0000

[..YouTube..] @btripclip the Tiberius markers are not designed to shoot without the barrel attached. If you try without the barrel, the bolt shoots forward and locks in the open position, which will drain all of the gas like what you are describing. Although, I’m not sure why when the barrel is in, the gun is not firing.

By: btripclip

btripclip — Fri, 05 Mar 2010 01:10:48 +0000

[..YouTube..] when barrel is out big air leak from bolt. I tried both clips. Barrel in with spring no shoot and no air leaks.Cleaned it like i usually do and yes i do push bolt forward. funny thing is that when i pull out barrel then squeeze trigger bolt slides forward then leaks air.

By: ModernIntel

ModernIntel — Fri, 05 Mar 2010 00:13:41 +0000

[..YouTube..] @btripclip where is the leak coming from, the back or inside the grip where the mag meets the receiver? Leaks can be caused by either a worn o-ring on a magazine as well. Did you remember to push the bolt forward again after disassembling the marker?

By: btripclip

btripclip — Fri, 05 Mar 2010 00:10:36 +0000

[..YouTube..] I took my t8 apart to clean it and when i put it back together had an air leak tried to replace all the o-rings and still leaks,plus bolt moves back and forth put spring in and barrel and wont shoot.Take barrel&spring out bold will slide and i here loud air leak any suggestions?

By: cuevas04

cuevas04 — Mon, 08 Feb 2010 21:43:27 +0000

[..YouTube..] thanks guys…….this help the wifee to break down her SA8.

By: softermanslikecheese

softermanslikecheese — Wed, 13 Jan 2010 17:05:58 +0000

[..YouTube..] please do a compirison of the tippmann 98 / bt-4 combat

By: ModernIntel

ModernIntel — Wed, 13 Jan 2010 15:58:16 +0000

[..YouTube..] @SgtPaul1 there’s really nothing to the hammer (bolt) of the T8. Just follow the disassembly video and and wipe off any paint that you find along the way. When you reassemble, oil any o-rings you see, we point out most in the video.

By: SgtPaul1

SgtPaul1 — Wed, 13 Jan 2010 15:46:53 +0000

[..YouTube..] Do you have any problem with hammer? Do you must do anything wit hammer when you was cleaning Tiberius? What i must do when a cut the ball in the pistol? Thx. Sorry form my english i came from Czech Republic.

By: iseeuat100yds

iseeuat100yds — Sat, 19 Dec 2009 21:07:49 +0000

[..YouTube..] saved my gun man!

By: Aaron Hughes

Aaron Hughes — Sat, 05 Dec 2009 04:33:24 +0000

There is now a disassembly video dedicated to the Tiberius 8.1 available on our site!